Item Code: 0042

* Fabricated of grade 304 stainless steel
* Holds one 9 inch toilet roll
* Unit has viewing slot to reveal toilet paper roll inside
* Overall size: 270mm W x 270MM H x 115mm D


SPECIFICATION

Single Jumbo Toilet Roll Holder shall hold one (1) roll up to 254mm
diameter with 41mm diameter core or 57mm diameter core. Cover
shall be 20 gauge, grade 304 stainless steel with a No. 4 satin finish.
Rear of cabinet shall have five (5) mounting holes to suit No. 8 or No.
10 flat head screws (not supplied). Cover shall be of one piece
construction hung on stainless steel pin hinges and shall be held
closed by a tumbler lock keyed to other JD MacDonald washroom
equipment with key provided. A viewing slot with clear plastic window
shall be provided. Unit shall accommodate smaller core size roll by
removing the rubber core adapter O rings. Opening on bottom of
cabinet shall have stainless steel teeth for toilet tissue tearing on both
sides. Cover at top shall have shoulder pin to interlock back plate
when closed.

INSTALLATION
Use five (5) screws through mounting holes (supplied by others). For
mounting height standards refer to current Building Code of Australia
for able bodied and/or disabled use.

OPERATION
One (1) 254mm OD jumbo roll of toilet tissue is mounted over 57mm
ID core adapter. One (1) 41.3mm ID core roll may be used by
removing the rubber core adapter rings. Viewing slot continuously
reveals tissue level. Key locked cover prevents unauthorized access
or removal. Roll is replaced on a cycle determined by maintenance
needs.